Jaeger enamel" professional kit"

Repair set

Jaeger bathtub enamel makes old bathtubs new again!

Click on the images for a bigger format!

See available colors.

The finishing should be done according to the following instructions:

• Before the finishing

- Remove towels and other textiles from the bathroom (this can be done by the customer)

- Eventual silicone seamings removes or covers .

- Eventual cracks and hollows in the tub smooths using polyester filler (ex. Plastic Padding). 

- Frosting, washing and drying of  the bathtub according to the manufacturer’s instructions.

- The drain cover removes, if possible.

- Eventual valves and windows covers in the bathroom.

- Water taps covers with plastic bag. Water musn´t drop on bathtub during the finishing.

- The bathroom has to be completely dustless before and during the finishing.

 

• Since the work is done following 24 hours

- Do not open the bathroom window during the first 24 hours. Cold and humid air can affect the finish.

- The bathtub surface is dustdry not sooner than in 5 hours after the work is done. Therefore, keep the bathroom door closed.

- You can remove the coverings and tapes the next day after the work is done. You can now use the bathroom. Do not remove the plastic bag over water taps.

- In 24 hours after the work is done, you can open the window and air the bathroom. Please, note that the temperature has to remain constant in the bathroom.

 

• Total drying period 5 days

- Please, note that the bathtub cannot be used during the whole drying period. Follow the instructions below.

- The temperature has to be at least + 22° C during the whole drying period.

- Make sure that no water drops on the bathtub.

• 5 days after the work

- You can have any temperature you like in the bathroom

- You can now fasten the eventually removed drain cover.

- You can now do the eventual silicone seamings.

- You can now remove the plastic bags covering the water taps.

• Instructions to use and clean the "new" bathtub

- Clean the bathtub with liquid household cleaner (ex. Fairy) and soft sponge. Do not use scouring powder in order to avoid scratching the surface.

- If you use bubble bath or bath salts, run first water into the bathtub and then add the foam or salts. These chemicals may tarnish the enamel finish.

- Medicated baths may contain colouring agents which may dye the bathtub. (The risk is the same with all the bathtubs, even those with original enamel finish.)

Avoid using hard objects in the bathtub, ex. washing dogs or taping the waste water from washing maskin is not recommended.

 

Guarantee

- FINEMA gives 1 year guarantee for enamelling one bathtub.

Prices

Travel cost, add 0,40 €/km.

Seaming with sanitary silicon 35,- €. Change of drain gasket 5,- €.

The VAT 22% is included.

* Freight- and handling fee 10,- €, in Finland.

Would you like to become Jaeger-entrepreneur?

There are vacancies for sales representatives. Additional information here.

 

Import, marketing and sale

© 2005 Finema.